LOT OF 10 CISCO CP-7940G TWO BUTTON SCCP VoIP PoE PHONE HANDSET (SIP AVAILABLE)

LOT OF 10 CISCO CP-7940G TWO BUTTON SCCP VoIP PoE PHONE HANDSET (SIP AVAILABLE)
LOT OF 10 CISCO CP-7940G TWO BUTTON SCCP VoIP PoE PHONE HANDSET (SIP AVAILABLE)
LOT OF 10 CISCO CP-7940G TWO BUTTON SCCP VoIP PoE PHONE HANDSET (SIP AVAILABLE)

LOT OF 10 CISCO CP-7940G TWO BUTTON SCCP VoIP PoE PHONE HANDSET (SIP AVAILABLE)
ITEM IS USED, TESTED AND WORKS. SIP FIRMWARE IS AVAILABLE IF YOU REQUEST. Various methods or paths include buttons, soft keys, a navigation key, and direct access with the use of corresponding "ghost" digits. Each of the following features will have expanded capabilities in the future.

The Messages key offers direct access to voicemail. In the near future voicemail speech-to-text readout will be available on the display (Figure 3).

The corporate directory integrates with the Lightweight Directory Access Protocol (LDAP3) standard directory (Figure 4). The Settings feature key allows the user to adjust display contrast and select from a large number of unique ringer sounds, volume settings for all audio such as ringer, handset, headset, and speaker.

Network configuration preferences can also be set up. Network configuration is usually set up by the system administrator.

Configuration can be either automatic or manually set up for Dynamic Host Control Protocol (DHCP), Trivial File Transfer Protocol (TFTP), Cisco Unified CallManagers, and backup Cisco Unified CallManagers. A huge advantage is the ability for no hands on moves and changes. No system administration is required (Figure 5). The pixel display allows for greater flexibility of features and significantly expands the information viewed when using features such as Services, Information, Messages, and Directory. For example, the Directory button can show local and server-based directory information (Figure 7).

It also includes an easy-to-use speaker on/off button and microphone mute buttons. These buttons are lit when active (Figure 8). The system administrator can designate separate VLANs (802.1Q) for the PC and Cisco IP phones, providing improved security and reliability of voice and data traffic. A dedicated headset port eliminates the need for a separate amplifier when using a headset, allowing the handset to remain in its cradle and thereby making headset use simpler. The handset is hearing aid-compatible (HAC) and meets FCC loudness requirements for Americans with Disabilities Act (ADA). Section 508 loudness requirements can be achieved using industry-standard inline handset amplifiers such as Walker Equipment W-10 or CE-100 amplifiers. The dial pad is also ADA-compliant. The footstand is keyed to match standard wall jack configurations for wall mounting. Two optional wall-mount brackets are also offered. For added security, the audible dual tone multifrequency (DTMF) tones are masked when the speakerphone mode is used.

A HAC handset (meets ADA requirements) and HAC compliance for magnetic coupling to approved HAC hearing aids. 323 and Microsoft NetMeeting compatibility. An IP address assignment-DHCP client or statically configured. Comfort noise generation and voice activity detection (VAD) programming on a system basis.

Dimensions: 8 x 10.5 x 6 in. (20.32 x 26.67 x 15.24 cm) (H x W x D). Polycarbonate acrylonitrile butadiene styerene (PABS) plastic in textured dark gray color with silver bezel.

48 VDC required, supplied locally at the desktop using an optional AC-to-DC power supply (CP-PWR-CUBE-3=). The item "LOT OF 10 CISCO CP-7940G TWO BUTTON SCCP VoIP PoE PHONE HANDSET (SIP AVAILABLE)" is in sale since Thursday, November 03, 2016. This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Wired Routers". The seller is "gruzinchik" and is located in Baltimore, Maryland. This item can be shipped worldwide.


LOT OF 10 CISCO CP-7940G TWO BUTTON SCCP VoIP PoE PHONE HANDSET (SIP AVAILABLE)


Home  Sitemap  Contact  Privacy Policy  Terms of Use