Viking Electronics SIP Loud Ringer with Visual Ring for SIP VoIP Phones VK-SR-IP

Viking Electronics SIP Loud Ringer with Visual Ring for SIP VoIP Phones VK-SR-IP

Viking Electronics SIP Loud Ringer with Visual Ring for SIP VoIP Phones VK-SR-IP

SIP Loud Ringer with Visual Ring Indication. When registered with a SIP server, the SR-IP will ring in one of 4 programmable ring patterns and flash a bright red LED upon ring detection. During ring detection the units internal relay contacts will also activate providing a trigger for a Viking Model SL -2 Strobe light or LPL-1 visual ring indicator.

Equipped with a high efficiency Class D power amplifier and high quality loud speaker, the SR-IP is typically over 10 times louder than a telephone speaker. The advanced features of the SR-IP include programmable Automatic Gain Control (AGC) technology which automatically increases loud ring volume to compensate for background ambient noise. The AGC feature is ideal for variable noise environments offices, classrooms, restaurants, etc. , and ensures that ringing is always heard but not unnecessarily loud. Loud Ringer for noisy or variable noise enviroments (offices, classrooms, factories).

Visual Ring Indicator for quiet areas (Hospitals, Church, Theater). 2 Amp relay contacts for Viking LPL-1or SL-2 strobe light control. Bright red visual ring indicator LED. PoE powered (class 2, <6.5 watts).

Automatic Gain Control (AGC) to automatically increase ring volume to compensate for ambient noise. Surface mounts to a single gang or 4 x 4 electrical box or directly to a wall or post. Extended temperature range (-40°F to 140°F). Four programmable ring cadences: normal (2 sec ON / 4 sec OFF), double, short-short-long, short-long-short.

Optional LPL-1 Remote Visual Ring Indicator (DOD# 640). Optional SL-2 or BLK-4-EWP strobe light kit available (DOD# 242/653). Power: PoE class 2 (<6.5 watts). Note: For applications requiring louder ring, see Viking model PA-2A-IP.

Dimensions: 140mm x 115mm x 38mm (5.5 x 4.5 x 1.5). Operating Temperature: -40° C to 60° C (-40°F to 140°F). Humidity: 5% to 95% non-condensing. Audio Codecs: G711u, G711a, G722. Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over. Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors.

Programmable Automatic Gain Control (AGC), which automatically compensates the ring volume for background ambient noise. Applications - use the loud ringer for noisy or variable noise environments and the visual ring indicator for quiet areas. 2 Amp relay contacts for LPL-1 or SL-2 strobe light control.

Class 2 PoE with consumption <6.5W. Surface mounts to a single gang or 4"x4" electrical box, wall, or post. Maximum Sound Pressure: 93dB SPL at 1 meter. The item "Viking Electronics SIP Loud Ringer with Visual Ring for SIP VoIP Phones VK-SR-IP" is in sale since Saturday, April 08, 2017. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\VoIP Business Phones/IP PBX". The seller is "nolan-river-bay" and is located in Austin, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Chile, Colombia, Costa rica.


Viking Electronics SIP Loud Ringer with Visual Ring for SIP VoIP Phones VK-SR-IP


Home  Sitemap  Contact  Privacy Policy  Terms of Use